home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Supervisor's Toolkit
/
Network Supervisor's Toolkit.iso
/
patches
/
vlmup3
/
vlmup3.exe
/
VLMS
/
NETCFG.TXT
< prev
next >
Wrap
Text File
|
1994-12-13
|
15KB
|
391 lines
CONTENTS
1. Description of NetWare DOS Requester Software
2. New NET.CFG parameters and changes since 1.10 VLMs
3. NET.CFG Parameters for the NetWare DOS Requester Option
1. Description of NetWare DOS Requester Software
The NetWare DOS Requester consists of a number of files that
provide NetWare support for a DOS client. Unlike previous
versions of the NetWare DOS client, the Requester is built on
a number of Virtual Loadable Modules (VLMs). The VLM.EXE (VLM
manager) is responsible for loading the required modules.
NOTE: The NetWare DOS Requester is NOT compatible with
NETX.COM or NETX.EXE. Use NETX.VLM for compatibility with
shell calls.
The following table lists the current core modules in their
default load order. The table also includes descriptions,
default values, and flags indicating whether the module is
"Required" or "Optional" for each of NetWare Directory
Services or bindery services.
MODULE DESCRIPTION NDS BIND PNW
====== =========== === ==== ===
CONN.VLM Connection table manager R R R
IPXNCP.VLM Transport protocol R R R
implementation using IPX
TRAN.VLM Transport protocol multiplexor R R R
SECURITY.VLM NetWare enhanced security O O O
NDS.VLM NetWare protocol implementation R O O
using Directory Services
BIND.VLM NetWare protocol implementation O R O
using the Bindery
PNW.VLM NetWare protocol implementation O O R
using Personal NetWare
NWP.VLM NetWare protocol multiplexor R R R
FIO.VLM File Input/Output R R R
PRINT.VLM Printer Redirection O O O
GENERAL.VLM Miscellaneous functions for R R R
NETX.VLM and REDIR.VLM
REDIR.VLM DOS redirector R R R
NETX.VLM NetWare shell compatibility O O O
RSA.VLM RSA encryption for directory O O O
services reauthentication
WSSNMP.VLM Desktop SNMP module, which O O O
includes support for MIB-II
System and SNMP groups
WSREG.VLM MIB registration module O O O
WSASN1.VLM ASN.1 translation module O O O
WSTRAP.VLM Trap module O O O
MIB2IF.VLM MIB-II interface groups support O O O
MIB2PROT.VLM MIB-II support for the O O O
TCP/IP groups
AUTO.VLM Auto-reconnect/auto-retry O O O
NMR.VLM NetWare management responder O O O
--------------------------------------------------------------------
2. NEW NET.CFG PARAMETERS Since the VLMs 1.10
A> CONFIRM CRITICAL ERROR ACTION = ON|OFF {default is ON}
Previously in Windows, critical errors may have been intercepted by Windows
before the VLMs received the critical error. If the user entered CANCEL after
receiving, the Windows error "Cannot read from device network--
Cancel--Retry", Windows would proceed to tear the connection to the server
down without user intervention or notification.
This new net.cfg parameter will intercept the INT 24 (critical error), and
allow the user to "Retry" manually, before the connections are torn down.
For this parameter to work, the NETWARE.DRV v3.03 must be loaded (WINDR1.EXE).
Make sure to have the following in the SYSTEM.INI file:
[boot]
network.drv=netware.drv
B> EOJ = ON|OFF {default is ON}
Previous versions of the VLMs would not parse this parameter.
This version of the VLMs will now parse the EOJ = ON|OFF NET.CFG parameter.
This option will turn the end of job automatic closing of files, locks,
semaphores, and so forth, ON or OFF. This supports EOJs from a DOS INT 21 D6
function call.
C> FORCE FIRST NETWORK DRIVE = ON|OFF {default is OFF}
Previously, if you typed logout from any drive other than a local drive or
the FIRST NETWORK DRIVE, the SYS:LOGIN drive would be mapped to the drive
letter you logged out from.
If set to ON, this parameter will force the SYS:LOGIN drive to be mapped to
the "FIRST NETWORK DRIVE = ?" drive upon logout.
D> LIP START SIZE=xxx {default is 0, min is 576, max is 65535, 0 is off}
This parameter was provided for those that operate across mulitple hop routes,
with one segment of the connection that has smaller packet sizes than the local
routes, but larger than the minimum packet size of 576 bytes. This improved
algorithm improves performance while drastically improving thruput.
E> LOAD LOW FIO=ON|OFF {default is OFF}
FIO.VLM now can be loaded low (In conventional or UMB memory). This
increases performance for repeated reads and writes, such as with database
applications
To load the transient portion of FIO.VLM into conventional or UMB memory,
add the following parameter to the workstation's NET.CFG under the NETWARE DOS
REQUESTER heading:
LOAD LOW FIO = ON
F> LOAD LOW NETX=ON|OFF {default is OFF}
NETX.VLM now can be loaded low (In conventional or UMB memory). This
increases performance for repeated reads and writes, such as with database
applications
To load the transient portion of NETX.VLM into conventional or UMB memory,
add the following parameter to the workstation's NET.CFG under the NETWARE DOS
REQUESTER heading:
LOAD LOW NETX = ON
G> LOAD LOW REDIR = ON|OFF {default is OFF}
REDIR.VLM now can be loaded low (In conventional or UMB memory). This
increases performance for repeated reads and writes, such as with database
applications.
To load the transient portion of REDIR.VLM into conventional or UMB memory,
add the following parameter to the workstation's NET.CFG under the NETWARE DOS
REQUESTER heading:
LOAD LOW REDIR = ON
H> LOCK DELAY = xxx {default is 1, min is 0, max is 255}
This version of the VLMs will now parse this parameter. The "Lock Delay"
determines the delay between LOCK RETRIES. The delay value determines the
number of 64 KB empty loops to execute between RETRIES. This parameter is
dependant on processor speed. Faster CPUs will execute a 64 KB no-op loop
faster; therefore, they may need to have this parameter increased.
I> LOCK RETRIES = xxx {default is 3, min is 0, max is 255}
The "Lock Retries" determines the number of retries that are executed if a
SHARE violation/failure occurs when opening or locking a file.
CHANGES TO NET.CFG PARAMETERS Since the v1.10 VLMs
A> READ ONLY COMPATIBILITY = ON|OFF {default is OFF}
In previous versions of the VLMs, READ ONLY COMPATIBILITY defaulted to ON.
The default was changed to make the VLMs consistent with NETX.EXE v3.32.
-------------------------------------------------------------------
3. NET.CFG File Parameter for the NetWare DOS Requester Option
The following table lists the parameters for the various
modules of the NetWare DOS Requester.
The following list is complete. Any parameters which may
have been used previously by the NetWare DOS Requester but are
not listed here are invalid.
Parameter/Default Minimum Maximum Module
AUTO RECONNECT = ON -- -- AUTO.VLM
NDS.VLM
Note: When this parameter is OFF, the AUTO.VLM load fails at
pre-initialization time.
AUTO LARGE TABLE = OFF -- -- AUTO.VLM
Note: When this parameter is OFF, the user name and password
maximum lengths are 16 chars each for auto reconnect.
AUTO RETRY = 0 0 3640 AUTO.VLM
AVERAGE NAME LENGTH = 48 2 48 CONN.VLM
BIND RECONNECT = OFF -- -- AUTO.VLM
BIND.VLM
BROADCAST RETRIES = 2 0 255 PNW.VLM
BROADCAST SEND DELAY = 0 0 255 PNW.VLM
BROADCAST TIMEOUT = 3 1 255 PNW.VLM
CACHE BUFFERS = 5 0 64 FIO.VLM
CACHE BUFFER SIZE =(Media dependent) -- FIO.VLM
CACHE WRITES = ON -- -- FIO.VLM
CHECKSUM = 1 0 3 IPXNCP.VLM
NWP.VLM
0 = disabled
1 = enabled but not preferred
2 = enabled and preferred
3 = required
CONFIRM CRITICAL ERROR ACTION =ON -- -- VLM.EXE
NOTE: Netware.drv v3.03 or higher must be used for this
parameter to work.
CONNECTIONS = 8 2 50 CONN.VLM
FIO.VLM
NDS.VLM
SECURITY.VLM
AUTO.VLM
DOS NAME = MSDOS 1 5 chars NETX.VLM
GENERAL.VLM
EOJ=ON -- -- NETX.VLM
REDIR.VLM
EXCLUDE VLM = <vlm> -- -- VLM.EXE
FIRST NETWORK DRIVE = <none> A Z GENERAL.VLM
NETX.VLM
NOTE: If FIRST NETWORK DRIVE is not specified, it will default
to the first available drive letter.
FORCE FIRST NETWORK DRIVE=OFF -- -- GENERAL.VLM
HANDLE NET ERRORS = ON -- -- IPXNCP.VLM
LARGE INTERNET PACKETS = ON -- -- IPXNCP.VLM
NWP.VLM
LIP START SIZE = 0 576 65535 IPXNCP.VLM
NWP.VLM
LOAD CONN TABLE LOW = OFF -- -- CONN.VLM
LOAD LOW CONN = ON -- -- CONN.VLM
LOAD LOW FIO = OFF -- -- FIO.VLM
LOAD LOW IPXNCP = ON -- -- IPXNCP.VLM
LOAD LOW NETX = OFF -- -- NETX.VLM
LOAD LOW REDIR=OFF -- -- REDIR.VLM
LOCAL PRINTERS = 3 0 9 PRINT.VLM
LOCK DELAY=1 0 255 NETX.VLM
GENERAL.VLM
LOCK RETRIES=3 0 255 NETX.VLM
GENERAL.VLM
LONG MACHINE TYPE = IBM_PC 1 6 chars NETX.VLM
GENERAL.VLM
MAX TASKS = 31 5 254 CONN.VLM
MESSAGE LEVEL = 1 0 4 VLM.EXE
0 = V_LEVEL_STD; always display message and critical errors
1 = V_LEVEL_WARNING; display warning type messages
2 = V_LEVEL_PROG; display the program load message
3 = V_LEVEL_CONFIG; display configuration information
4 = V_LEVEL_DIAG; display diagnostic information
MESSAGE TIMEOUT = 0 0 10000 NWP.VLM
MINIMUM TIME TO NET = <number> 0 -- VLM.EXE
MOBILE MODE = 0 0 65535 PNW.VLM
NAME CONTEXT = "<namecontext>" -- -- NDS.VLM
Note: Quotation marks are required.
NETWARE PROTOCOL = <NetWare protocol list> VLM.EXE
Note: The <NetWare Protocol list> is the list of
protocols to be used (NDS.VLM, BIND.VLM and PNW.VLM)
by the Requester in the order of their priority.
Each protocol is separated by a comma or space
in the list (NDS,BIND,PNW). If you exclude any one of
the protocol .VLM files from the list, the excluded
.VLM file will not load.
NETWORK PRINTERS = 3 0 9 PRINT.VLM
NOTE: If set to 0, PRINT.VLM will not load.
PB BUFFERS = 3 0 10 FIO.VLM
IPXNCP.VLM
0 = off
nonzero = on
PBURST READ WINDOW SIZE = 16 2 64 FIO.VLM
PBURST WRITE WINDOW SIZE = 10 2 64 FIO.VLM
PREFERRED SERVER = <server name> -- -- BIND.VLM
PREFERRED TREE = <tree name> -- -- NDS.VLM
PREFERRED WORKGROUP = <workgroup> -- -- PNW.VLM
PRINT BUFFER SIZE = 64 0 256 PRINT.VLM
PRINT HEADER = 64 0 1024 PRINT.VLM
PRINT TAIL = 16 0 1024 PRINT.VLM
READ ONLY COMPATIBILITY = OFF -- -- REDIR.VLM
RESPONDER = ON -- -- PNW.VLM
SEARCH MODE = 1 0 7 GENERAL.VLM
SET STATION TIME = ON -- -- VLM.EXE
SHORT MACHINE TYPE = IBM 1 4 chars NETX.VLM
GENERAL.VLM
SHOW DOTS = OFF -- -- REDIR.VLM
SIGNATURE LEVEL = 1 0 3 NWP.VLM
SECURITY.VLM
0 = disabled
1 = enabled but not preferred
2 = preferred
3 = required
NOTE: This parameter designates the level of enhanced security
support. Enhanced security includes the use of a message
digest algorithm and a per-connection/pre-request
session state for increased protection against intruder
attacks. When this parameter is set to 0 (disabled),
the SECURITY.VLM will not load.
TRUE COMMIT = OFF -- -- FIO.VLM
USE DEFAULTS = ON -- -- VLM.EXE
VLM = <path><vlm> -- 50 VLMs VLM.EXE
WORKGROUP NET = <wkg net addr> -- -- PNW.VLM